The Path To Finding Better Homes

Posted on Posted in Health Care & Medical

What You Must Know Regarding the Log Home Builder Kits

The first decision which you have to make when you think about using the log home builder kits for building that log home is the method of its construction. You can have the butt-and-pass method or the saddle notch method. Each style would actually refer to the manner in which the home is jointed at its corners.

You have to know that the saddle notch method would require the builders to cut that notch in the log that fits a perpendicular log that is going to be placed on top of this. The logs are then continuously stacked in such fashion to build a wall and the weight of the logs would make them lock lightly and create those secure corners. There are some builders which drive a bolt or stake through the logs in order to add security.

Through the butt-and-pass method, such perpendicular log is butted against the existing log when the stacking of the log is started. At the second level of stacking, the log is going to pass over the first perpendicular log. With the third level, the log would butt up against the perpendicular log. This stacking would continue until the wall is finished.
A Quick Overlook of Builders – Your Cheatsheet

You must understand that the butt-and-pass method utilized in the log home kits create such spacing between the logs that have to be filled with chinking as well as insulation, that is a method similar to caulking such log home. Logs are then secured with bolts and stakes driven down from a log to the next.
Learning The Secrets About Houses

Naturally, such saddle notch method would tend to be costlier for the builders as well as the homebuyers. One of the reasons is due to the amount of precision to have the logs aligned properly. This is going to take such careful measuring so that the logs are going to be cut at the right inch specifications to allow the perpendicular log to fit into the groove and have that tight corner.

Even if some of the companies are claiming to use the butt-and-pass method for the log home kits, there are critics that have contended this type of method is not possible using the kit. Kits are usually manufactured in other places and they are shipped for assembly on the area. Some builders do claim that the butt-and-pass method is strong and this cannot be shipped in parts and also be reassembled.

One challenge that lot of homeowners who buy the log home builder kits face is that after its assembly, settling would start. This is one natural process which forces some parts of the house to fall out of the alignment about a year or so after the logs have totally dried up.